Archive for the ‘dodge challenger’ Tag

Mopar 17 Challenger: first with a 392

The eighth Mopar-branded vehicle to be produced is the Mopar 17 Challenger, designed to help celebrate the 80th anniversary of Mopar.

 

The Mopar-branded car has the interior and exterior appearance upgrades that we would have expected, but the big news with this Mopar Challenger is under the hood. For the first time, a Mopar-branded production vehicle is powered by the 392 cubic inch Hemi with 485 horsepower and 475 pound-feet of torque, making this the most powerful Mopar-branded car in the history of the program. Ever other Mopar car, other than the Dart, was powered by the 5.7L Hemi.

In addition to the basic features of the 392 Shaker engine setup, the Mopar 17 Challenger has a Mopar cold air intake paired with a driver’s side Air Catcher headlight, but there is no word of any added power from the extra cool air.

 

On the other hand, the Mopar strut tower braces improve handling performance, in addition to looking cool in the engine bay.

The 392 cubic inch Hemi might be the biggest news with the Mopar 17 Challenger, but buyers can get that powerful mill with a handful of different trimlines.

Where the Mopar 17 stands out from, say, the 392 Scat Pack Hemi Shaker, which shares the same drivetrain and cold air induction hood system, is in the interior and exterior design.

On the outside, the Mopar 17 Challenger is black on the hood, roof, pillars and trunk lid, and Contusion Blue or Billet Silver elsewhere. The unique, silver 392 decals on the fenders show off the Mopar “omega M;” the car also has machined-face 20 inch Scat Pack wheels with black painted pockets. Finally, the package adds the exhaust tips from the SRT Hellcat and a Mopar badge on the rear spoiler.

Inside, the Mopar 17 Challenger Shaker has SRT performance seats with suede centers and leather bolsters, all in black with gray (“Tungsten”) embroidered Mopar logos. The stitching uses Tungsten thread throughout, matching the embroidery. There is plenty of black leather trim throughout the cabin, and a serial badge announcing the number (out of 80) for that particular car.

Finally, buyers of the Mopar 17 Challenger will get a unique owner’s package, which includes a Mopar welcome letter, a “birth certificate” with the build date, an autographed Mopar 17 rendering from the design team, a Mopar 17 book with information on the vehicle, an acrylic “memorabilia showpiece,” Mopar valve stem caps, a keychain, and an anniversary badge.

The bad news is that the Mopar 17 Challenger will be limited to just 160 cars – 80 in Contusion Blue and 80 in Billet Silver.

When these cars begin reaching dealerships in the second quarter of 2017, they will have an MSRP starting at $55,790 (not including destination).

Read more at: http://www.allpar.com/cars/mopar/17-challenger-392.html

Dodge Challenger ADR prototypes spied with massive rubber

In an effort to give the Dodge Challenger one last hurrah before making the switch to the Giorgio platform in 2018, Automotive News reports that the automaker will come out with the Challenger ADR. The ADR, which stands for American Drag Racer, is expected to be a wide-body, Hellcat-powered variant that is closely based off of the current model. The report seems to have merit, as photographers have captured Challenger prototypes testing with massive tires.

The prototypes look extremely similar to the current Challenger SRT Hellcat with the same hood scoop, front fascia design, rear spoiler construction, and rear end. The white and purple vehicles, though, are wearing extremely wide tires. The extra-wide rubber on the prototypes appear to have a similar tread design as the ones found on the Dodge Viper ACR, which features the grippy Kumho Ecsta V720.

While the ACR wears 295 mm tires at the front, the car’s rear tires are massive at 355 mm. The tires found on the prototype don’t appear to be as large as the ones found on the ACR, but are expected to be larger than the current Challenger SRT Hellcat’s, which are Pirelli P Zero Neros measuring 275 mm at all four corners. The Challenger ADR, with its wider, stickier tires is expected to cater to drivers that are looking to put all of the supercharged 6.2-liter V8’s power to the ground.

The rear-wheel-drive ADR is expected to come with a wide-body kit, which is missing from the prototypes. The Hellcat-powered, wide-body Challenger ADR is expected to make an appearance later in 2017, with an all-wheel-drive model (sans Hellcat engine) known as the GT AWD following closely thereafter.

Read more at: http://www.autoblog.com/2016/10/03/dodge-challenger-adr-prototypes-spy-shots/

Test Drive a Dodge Challenger Today

Strap yourself in and get ready for the ride of your life when you’re driving the 2016 Dodge Challenger for sale in Plymouth, MI. This legendary muscle car has top-notch power that gives you heart-racing performance every time its engine roars to life. To see this beast for yourself in person, take a quick trip over to Dick Scott Chrysler Dodge Jeep Ram.

Under the hood of the 2016 Challenger is the option between four robust engines, each of which is more powerful than the last. It comes standard with the 3.6L V6 Pentastar® engine on its base trim level to balance out power with responsible fuel economy. It offers 305 horsepower and 268 lb.-ft. of torque, and you’ll be able to pass up gas stations with ease as it records 30 MPG hwy1. To kick things up a notch when you need a burst of speed on I-275, upgrade to the 5.7L HEMI® V8 engine for a raucous 375 horsepower and 410 lb.-ft. of torque.

interior

Even more power awaits with the available 6.4L HEMI® V8 engine. It has a best-in-class2 485 horsepower to go with 475 lb.-ft. of torque. For when you’re out on the track, this engine will get you to a sizzling top speed3 of 182 MPH. The cream of the crop, however, is the supercharged 6.2L V8 HEMI® SRT Hellcat engine. It is the most powerful muscle car ever4, and you’ll have a rush of adrenaline every time you hit the gas with its 707 horsepower and 650 lb.-ft. of torque. On any of these engines, you have the option of between the TorqueFlite® 8-speed automatic transmission with paddle shifters, or a 6-speed manual transmission.

Slide into the interior of the 2016 Dodge Challenger for sale in Plymouth, MI, and you’ll find an area that is built to make driving more comfortable for you, the driver. It has a class-exclusive4 7-inch reconfigurable Driver Information Digital Cluster Display that can offer a variety of vehicle information, including 0-60 MPH time3, reaction time, and a lap timer. For entertainment, the 2016 Challenger offers an available Sound Group with six Alpine® speakers and a 276-watt amplifier. For an even better listening experience, upgrade to Sound Group II with nine Alpine® speakers, a subwoofer, and a 506-watt amplifier. With the available Uconnect® 8.4 NAV, you’ll have a class-exclusive4 8.4-inch touchscreen to host all of your favorite apps, navigation, and more!

The 2016 Dodge Challenger for sale in Plymouth, MI, is a muscle car that is able to back up its notoriety with incredible performance. But the Challenger has so much more to offer than just raw power! Take it for a test drive today at Dick Scott Chrysler Dodge Jeep Ram, located at 684 W. Ann Arbor Rd. in Plymouth, MI!

Jeep Trackhawk: 600 hp?

The Dodge Challenger and Charger both have Hellcat engine options, bringing 707 horsepower to the cars. The Jeep Grand Cherokee Trackhawk has long been rumored, and sources say it will indeed have the same engine, but without the same tuning.

There could be several reasons why it would be detuned somewhat:

Cooling is a major issue with this amount of power, and the Hellcats have goals of high consistency at full power. Competing cars from Chevrolet and Shelby have been slammed for throttling back on the power as they quickly heat up at the track.

The Jeep, unlike the others, is rumored to be all wheel drive, which could allow quicker launches — but would put more stress on the entire system. The engine may have to be tuned to put out the power that can reasonably and economically be handled by the drivetrain and suspension.The Grand Cherokee has a higher center of gravity and too much power could be dangerous.

Regardless, a Jeep Grand Cherokee Trackhawk packing even 580 horsepower would be a major boost over the current 485 horsepower SRT model, and would likely attract even more attention from those who would normally go for a German crossover.

FCA US has already applied for a trademark on the Trackhawk name. The application has passed all the legal hurdles and USPTO approval of registration is now waiting for the company to file a Statement Of Use (SOU) in commerce.

Read more at: http://www.allpar.com/news/index.php/2015/10/jeep-trackhawk-600-hp-30326

First Hellcat tuning software launched

Hellcat Charger and Challenger owners looking for a few extra ponies may be excited to know that the first tuning system for the 6.2L supercharged Hemi has reached the market. It comes from Diablosport, one of the biggest names in the world of tuning, which has a history of adding power with their tuning software.<BR><BR>

Diablosport has three power levels, and an extra bit of added security, should you need to return to the dealership for repairs. In each case, the tune is added by plugging into the car’s diagnostics port and pressing a couple of buttons to add a claimed 30+ rear-wheel horsepower.<BR><BR>

The first tuning option is the stock tune, which works with the stock PCM tune so there is no power increase, but other aspects of the vehicle such as throttle response and transmission shifts are sharpened up for a more engaging driving experience. I haven’t driven a Hellcat car with the “stock tune,” but in other vehicles, it makes a big difference in driving dynamics. The Hellcat Challenger and Charger are good enough that the stock tune likely doesn’t have the impact on these cars that it does on my Dodge Ram, but this is an option for those who want a crisper drive with the stock power.<BR><BR>

The second tuning option is the 91 Octane Performance Tune; it sharpens up the throttle response and adds around 28 horsepower and around 22 lb-ft of torque. Since the Hellcat test cars used by Diablosport laid down 660 rear wheel horsepower, the 91 Octane tune pushes it up around the 690 rwhp mark.<BR><BR>

The top power comes from the 93 Octane Performance tune, which  adds more than 30 horsepower and more than 30 lb-ft of torque. With this, the Hellcat Challenger and Charger are both capable of laying down just over 700 rear wheel horsepower.  Diablosport claimed corrected numbers of 700.2 horsepower at the rear wheels, nearly 40 more horsepower at the rear wheels.<BR><BR>

Additional Features, Added Security<BR><BR>
Regardless of the tune, the Diablosport products allow Hellcat Dodge owners to adjust the neutral and idle RPM, move the rev limiter, adjust a speed limiter, disable the traction and stability control, adjustments for different tire sizes, and adjust when the cooling fan turns on and off – along with adjusting the engine parameters to make better power.<BR><BR>

All of the Diablosport Hellcat tuning packages come with an extra PCM that will make trips to the dealership a little less of a headache. Retuning the engine can both void your engine warranty and  cause  dealership people to give you a hard time when you come in for service. Owners can send their factory PCM to Diablosport to be unlocked, but from there on out, the dealership will be able to tell that the PCM has been accessed.<BR><BR>

The three tuning packages for the Hellcat Charger and Challenger coming with the tuning components themselves, along with an extra PCM already prepared to accept a tune. Thus, owners can swap out the factory PCM for the one with the tuning package; then swap the factory PCM back in before hitting the dealership. (This may violate the owner’s agreement with Dodge/FCA US).<BR><BR>

Prices
Partly because of the PCM being included, prices are fairly high. If you only want the modified PCM, e.g. to do custom tuning, Diablosport will sell it to you for $799.<BR><BR>

If you want the full tuning package from Diablosport, you can pick either their Trinity tuner or their InTune tuner, both of which come with the unlocked PCM. The Trinity for the Hellcat costs $1,199 while the InTune system costs $1,099. Based on those numbers and the Diablosport price of $799 for the new PCM, the actual performance tunes and the tuning components (Trinity, InTune) is $300-400.<BR><BR>

Read more at: http://www.allpar.com/news/index.php/2015/10/first-hellcat-tuning-software-launched-30303

The 1,000HP Gen III Hemi 1970 Dodge Challenger Dream Car

For some, Super Stock and “Super Stalk” might as well be one in the same. For others however, both are distinctly different, yet equally heroic endeavors. In NHRA Super Stock, the Big Three dumped ludicrous stacks of money to build factory ringers for bragging rights and bragging rights alone. This results in cool stuff like 9,000-rpm hydraulic roller small-blocks that run 9-second e.t.’s. By contrast, “super stalk” describes one man’s quest to chase down the exact same car for 30 years before finally convincing the owner to put it up for sale. It takes a very unique car to inspire such an extreme obsession, and the story behind Brook Niemi’s ’70 Dodge Challenger proves that the truth is indeed much more interesting than fiction.

Although people love reminiscing about how everything was better during the muscle car era, they rarely mention that it was also a time when real car guys worked at car dealerships. Imagine, for a moment, the luxury of ordering up the Mopar of your dreams with an employee discount to boot. Throw in a savvy employee’s knowledge of all the obscure option codes offered by Chrysler, and Brook’s Challenger is the result. “The original owner was a Dodge salesman in Great Falls, Montana, who ordered it as a company car,” Brook explains. “The dealership didn’t allow optioning company cars with Hemis or Six Pack induction systems, so he ordered it up with the R/T package, 440 big-block, a four-barrel carb, an A833 four-speed, and a Dana 60 rearend. Once the car arrived, he swapped out the four-barrel carb and the stock hood for a Six Pack and a factory T/A hood. The car was also optioned with the Special Edition package, which included a smaller back window, four-point seatbelts, and a console in the headliner.”

Eventually, the unique E-Body moved on to its second owner a few years later, which is when Brook first saw it and fell head over heels. “During high school in the late ’70s, the machine shop I was working at built a 500ci Six Pack engine for the Challenger. At that time it was painted white and built to look like the car from Vanishing Point,” he recalls. “I have such vivid memories of the owner pulling wheelies with the car in the parking lot. From that day forward, I always kept up with the car. The third owner purchased the car in the early ’80s and never drove it much.”

The bad news was that the Challenger’s third owner seemed to appreciate it more for its collectability than its Chevy-stomping potential. The good news was that this same lack of use kept the car in outstanding condition. “From the early ’80s to 2005, the car sat in storage. The owner at the time liked that the Challenger was one of less than 150 built with a 440 and a four-speed, but his real passion was for ’60s-era cars,” Brook says. “He planned on restoring the car back to stock someday, but he eventually had a change of heart and decided to sell it to help fund other projects. He had been sitting on my contact information for years, so as soon as I got the call that the car was available, I picked it up immediately.”

Throughout the course of its decorated history, this fine Mopar specimen had logged just 54,000 original miles. Even so, the 30-year-old paint had seen better days, so Brook stripped the car down, repainted it, and dropped the original 440 back in it. While the crew at Kindig-It Design tackled the paint and bodywork, the car revealed yet another one of its interesting secrets. “The paint code indicated that the car was originally Sublime Green. Since that made it even rarer, the shop tried to talk me into painting it the original OE color,” Brook recalls. “I understood the reasoning behind it, but in my mind the car had to be white because that’s the color it was when I first saw it as a kid. I always remembered it as a Vanishing Point tribute car, so that’s how I planned on restoring it.”

By sticking with his guns, Brook successfully re-created the car from his childhood dreams. All was good in his hood until a chance encounter with another Mopar triggered an avalanche of changes. “I was sitting at a stoplight one day when a Sublime Green Challenger R/T with a 426 Hemi pulled up behind me. It looked so good that even though I had just finished painting my car white, I decided at that moment that I had to repaint it green,” Brook says. On one hand, stripping the car back down just to repaint it seemed like an awful lot of work, and Brook was tempted to modernize the powertrain, suspension, and brakes. On the other hand, he had some reservations about throwing a bunch of non-original parts on such a rare piece of Mopar history. Ultimately, the itch to build something truly unique prevailed.

Seeking modern levels of power, driveability, braking, handling, and comfort in a 40-year-old chassis required a major overhaul of all the major mechanical hardware. Granted, a stock 440 provides plenty of scoot by most standards, but Brook wanted more power. Like three times more power. He determined that the best method of accomplishing this without increasing mass was by swapping out the big-block for a supercharged, all-aluminum Gen III Hemi. Absolute Performance (Sandy, Utah) welcomed the challenge and schemed up the perfect combination for Brook’s needs. The setup is based on an aftermarket aluminum block that’s been bored to 4.125 inches and fitted with a Callies forged 4.000-inch crankshaft, Oliver steel rods, and custom Wiseco 9.5:1 forged pistons. An Edelbrock E-Force supercharger pressurizes air molecules into a set of Thitek aluminum cylinder heads, and custom Arrow Lane headers evacuate the cylinders. The result is 426 ci of Gen III Hemi that kicks out over 1,000 hp and 1,100 lb-ft of torque. For easier freeway cruising, Brook replaced the A833 trans for a Tremec TKO 600 five-speed, which feeds torque to a Strange S60 rearend.

Of course, horsepower alone is meaningless if it all goes up in smoke, so Brook completely revamped the chassis with Reilly Motorsports hardware. Up front, the stock suspension has been replaced with an RMS K-member, control arms, sway bar, and coilovers. Out back, the factory leaf springs got yanked for an RMS four-link system. Monster Wilwood disc brakes convert forward inertia into heat, while 18-inch EVOD wheels wrapped in Nitto rubber plant the lateral and longitudinal loads to the pavement.

Inevitably, some collectors won’t take too kindly to throwing a late-model EFI motor along with modern suspension and brakes at a super rare Challenger with only 54,000 original miles. Nevertheless, from the car’s original interior to its stock body and paint, Brook has gone to great lengths to retain the essence of what the Challenger looked like when it rolled into the dealer lot in 1970. “Sure, I had some reservations about putting a bunch of modern parts on this car, but I’ve put the original engine, rearend, K-member, and suspension into safe storage. I can swap all the original parts back in very easily,” he explains.

Ultimately, Brook doesn’t have to explain himself to anyone. After patiently stalking his prey for 30 years, he’s earned the right to do whatever he wants, period correctness be damned. Despite how utterly badass Brook’s 1,000hp Challenger may be, its cool factor still takes a backseat to the incredible story behind it. Lusting over the same car for three decades, then transforming it into the ultimate E-Body, could just be the most rewarding car building experience of all time. As the saying goes, you can’t make this stuff up.

Fast Facts
1970 Dodge Challenger
Brook Niemi
South Jordan, UT

Engine

Type: Chrysler Gen III Hemi small-block

Block: Mopar Performance aluminum bored to 4.125 inches

Oiling: Melling oil pump, Milodon pan

Rotating assembly: Callies 4.000-inch steel crank, Oliver rods, Wiseco 9.5:1 pistons

Cylinder heads: CNC-ported Thitek aluminum castings

Camshaft: custom Arrow Racing hydraulic roller (specs classified)

Valvetrain: COMP Cams valvesprings, Smith pushrod

Induction: Edelbrock E-Force supercharger and throttle-body

Ignition: stock

Exhaust: custom Arrow Lane headers, custom X-pipe, dual 3-inch MagnaFlow mufflers

Cooling system: C&R Racing radiator, Spal electric fans

Output: 1,004 hp at 6,200 rpm and 1,109 lb-ft at 4,800 rpm

Drivetrain

Transmission: Tremec TKO 600 five-speed manual, Centerforce clutch, Hurst shifter

Rear axle: Strange S60 rearend with 35-spline axles, 3.54:1 gears, and limited-slip differential

Chassis

Front suspension: Reilly Motorsports K-member, control arms, coilovers, steering rack, and sway bar

Rear suspension: Reilly Motorsports four-link, Panhard bar, coilovers, and sway bar

Brakes: Wilwood 14-inch discs and six-piston calipers, front; Wilwood 12-inch discs and four-piston calipers, rear

Wheels & Tires

Wheels: EVOD Challenge 18×9.5, front; 18×10.5, rear

Tires: Nitto NT05 275/35ZR18, front; 295/35ZR18, rear

Read more at: http://www.msn.com/en-us/autos/enthusiasts/the-1000hp-gen-iii-hemi-1970-dodge-challenger-dream-car/ar-AAcoe4U

V10 Dodge Challenger revealed: 2011 Mopar Challenger V-10 Drag Pak

The much-rumored race-only V-10 powered rear-wheel drive 2011 Mopar Challenger Drag Pak was unveiled on October 1, featuring an 8.4-liter, 512 cubic-inch engine with a 2-speed automatic transmission, launched at the Dodge Viper Owner’s Invitational in Salt Lake City, with later appearances scheduled for the Specialty Equipment Market Association (SEMA) show in Las Vegas from Nov. 2-5, and the Performance Racing Industry (PRI) show in Orlando from Dec. 9-11.
Pietro Gorlier, President and CEO of Mopar, said: “With the introduction of our new 2011 Mopar Challenger Drag Pak, Mopar will be the only place to get a factory-built V-10-powered race-ready drag car. Mopar’s new Challenger Drag Pak is a race rocket that will appeal to racers, collectors, dealers, and Dodge Viper owners.”

mopar-challenger-drag-car

Based on the 2011 Dodge Challenger and finished in a Stock Eliminator and Super Stock configuration, the 2011 Mopar Challenger V-10 Drag Pak is the first and only 500-plus cubic-inch V-10 drag-race package car. The car features competition wheels and tires, a Mopar solid rear axle with performance gear ratio, a 2-speed drag race transmission with integrated roll control, a complete competition fuel system with fuel cell, and a complete interior with gauge package.

The Mopar Challenger V-10 Drag Pak features a Bright White paint scheme with color options. The Manufacturer’s Suggested Retail Price (MSRP) is $85,512 and production begins early next year.
Mopar offers three options with this vehicle. First, the Competition Package includes an eight-point roll cage, six-point safety harness and a mesh window net (MSRP: $7,950, part number P5155820). Second, a Mopar logo body wrap (MSRP: $950, part number P5155892) and a range of body colors (MSRP: $6,800, part number P5155893).

Orders must be submitted using the Mopar Challenger V-10 Drag Pak Application, which is available now at Mopar.com , the Mopar Direct Connection Tech Line at 888-528-HEMI (4364), or a local Dodge dealer. Customers should work with their local Dodge dealer to submit their application.
Allpar notes that the V-10 may be the first appearance of a new Viper engine, or it might be a race-only version that will never see street production. The 6.4 liter Mopar crate engine was never produced for street use, though an engine of identical size, with many differences, is to be installed in 2011 Dodge cars.

– Identification plate with unique serial number sequence; primed and painted body, color options available

– 512 cid V-10 engine

– 2-speed automatic transmission with shift assembly and built-in roll control

– Special body-in-white modified for drag racing

– No windshield wiper assembly, HVAC system (includes block off plates), rear seats, power-steering system, or underbody heat shields

– Complete fuel cell assembly

– Race headers with collectors

– Modified tunnel for transmission clearance and one-piece drive shaft

– Raised floor above differential for solid-axle conversion clearance

– Polycarbonate door windows; smart-glass door window system

– Solid engine mounts

– Mopar solid rear axle

– Lightweight seats to accommodate 6-point harness

– Special modified K-member with drop-out crossmember

– Lightweight drag-race only front brake assembly

– Manual rack-and-pinion steering

– Front chin spoiler

– Lightweight instrument panel assembly and cooling module, with electric fan

– Cable-operated decklid release and cable-operated throttle pedal and linkage

– Race-style wheels and tires

Read more at: http://www.allpar.com/cars/dodge/challenger/V10.html

Challenge Won: We Do 11 Seconds in the Dodge Charger Hellcat

The 2015 Dodge Charger SRT Hellcat unleashes a ludicrous 707 horsepower from its supercharged 6.2-liter V-8 to offer mad acceleration — the kind of white-knuckled blast of speed that’s not for the timid. The Charger SRT Hellcat, along with its coupe stablemate the Challenger SRT Hellcat, is a straight-line beast that’s very much at home on the drag strip, though it’s not too shabby on a road course either. Plus, it doesn’t fail to impress people you pass on the street.

Last year we tracked the then-new 2015 Dodge Challenger SRT Hellcat coupe down the quarter-mile to the tune of 11.41 seconds. While we came short of Dodge’s quarter-mile claim of 11.2 seconds, there was no doubting the capability was there waiting to be unleashed.

The Charger is even faster in Hellcat form. Drag strip durability testing was also built into the rocket ship masquerading as a family sedan’s development program. The automaker says the Charger Hellcat can run the quarter-mile in a ridiculously quick 11.0 seconds on factory tires. Few unmodified cars can make that kind of claim.

We set out to see how close we could get to 11.0 seconds with a factory-fresh 2015 Dodge Charger SRT Hellcat and drag strip rental of Byron Dragway in Byron, Ill.

Like the Challenger, the biggest obstacle is the rear-wheel-drive Charger simply wants to obliterate the relatively skinny, hard-sidewall street tires when trying to lay 700-plus horsepower to the ground. Our Charger was equipped with optional $195 Pirelli P Zero 275/40R20 summer tires, though that is by no means a solution to harness the Hellcat’s excessive horsepower and torque.

The quickest pass of the day came after 13 attempts of tweaking the launch, burnout, starting line preparation, electronic driving modes and tire pressure. After all that work we were rewarded with a blistering run of 11.03 seconds at 126.61 mph. It would be an understatement to say the car proved tricky to drive on its factory tires and a lie to say it was anything but a thrill to see those numbers pop up on the track’s timing board.

Getting to 11.03 seconds was no easy feat despite the Charger only coming with an automatic transmission — often easier to drag race than a manual — and our near-perfect track and weather conditions. We were lucky to have mid-50-degree temperatures rushing cool air through the V-8’s cooling systems and track conditions fit for cars much faster than the Hellcat. The drag strip’s track surface was prepped in various ways to assist tire grip, a normal drag strip practice. Along with the 11.03-second pass, we also ran 11.09 seconds and a number of 11.1-second passes.

There wasn’t a single lightbulb-over-the-head moment when clicking off the 11.03-second pass. It took a combination of tweaks, starting with the burnout. Our best run with the tires at factory pressure was 11.27 seconds before we dropped the tires to 25 pounds per square inch. Getting the right amount of heat in the tires proved to be imperative. The best burnout sequence included clicking the paddle shifters quickly to 3rd gear once the tires started roasting and waiting for tire smoke to show in the rearview mirror before riding out the burnout to just before the starting line to minimize tire temperatures loses. Anything higher or lower than a 160-degree tire temperature and we experienced falloff in bite.

The Hellcat’s electronic gadgetry sequence that worked best for our runs included switching the electronic stability system from Off during the burnout to Sport before launching. Sport mode gave the best balance of traction management and forward momentum compared with the Street and Track modes. The suspension’s softest Street mode provided the best weight transfer to the rear, and the transmission was left in automatic shifting but in the Track setting.

Getting the Charger Hellcat out of the hole was best accomplished by leaving the line as smoothly as possible from idle by gently squeezing the pedal before rolling into wide-open throttle at roughly the 60-foot mark on the drag strip; a drag strip’s timing system measure distance in intervals of 60 feet, 330 feet, an eighth-mile, 1,000 feet and a quarter-mile. Lower 60-foot times are a good indication of how well the car is leaving the starting line. The 1.77 seconds of the 11.03 run was bested by a 1.72-second 60-foot later in the day, but that run was botched when the tires let loose on the 2nd-gear shift, ending what could have been a glorious 10-second pass. It was the one that got away.

Our run of 11.03 seconds in the quarter-mile is insane for a sedan you can buy straight off the showroom floor. For that kind of hellacious acceleration the $63,290 starting price seems reasonable.

Read more at: https://www.cars.com/articles/challenge-won-we-do-11-seconds-in-the-dodge-charger-hellcat-1420680529178/?cmp=sf9667674+sf9667674

FCA’s lineup for New York show

While Fiat Chrysler will not be showing any new vehicles at the New York Auto Show, whose press days start tomorrow, the company will bring a wide range of cars and trucks for those who don’t travel the country to see unveilings as they happen.

The most controversial entry is the 2015 Ram Laramie Limited, first shown in Chicago, which Ram called “the benchmark in truck opulence.” From Detroit, Ram is showing the 2015 Ram Rebel, which includes a suspension lift, 33-inch tires, a custom interior, and the first non-crosshair grille in some time.

Alfa Romeo is showing off the 2015 Alfa Romeo 4C Spider, which follows the coupe version; it has absurdly low weight thanks to a carbon fiber monocoque chassis, allowing it to use a 1.75 liter turbocharged engine to from 0 to 60 mph in 4.1 seconds.

As one might expect, the new Chrysler 300, Dodge Charger, and Dodge Challenger will all be shown; each of these cars has a standard eight speed automatic (Challenger also has six-speed manuals for every V8). Among the Challengers will be the 392 Hemi Scat Pack Dodge Challenger Shaker, and both Hellcat Charger and Hellcat Challenger.

Fiat is showing the new 2016 Fiat 500X, a larger-than-500 hatchback, presumably along with the 500L, 500C, and 500.

The Jeep Renegade will be shown, and since it was on the off-road demonstration track in Chicago, we expect it to be in the New York track as well.

Mopar will spotlight four customized models; the Jeep Performance Parts-equipped Jeep Renegade makes the Trailhawk model more trail tough, the Sublime Green Dodge Challenger T/A Concept blends vintage design cues with Mopar parts, the Chrysler 200S Mopar shows a new body kit, and the Fiat 500L Custom has been, as the name indicates, customized.

We also expect Maserati to show off their full line, and Ferrari is bound to be present.

Camp Jeep will return to New York, with an 18-foot high Jeep Mountain and Trail Rated Pass three-wheeling demo. Other interactive rides include the 2015 Dodge Charger racing simulator; 2015 Ram Truck off-road simulator; and Chrysler brand’s “Beneath the Surface” 4-minute, 4D-immersive experience using the Oculus Rift DK2 headset, showcasing how the 2015 Chrysler 200 is made.

The New York Auto Show is held at the Javits Center, which is walking-distance from Penn Station, the midtown ferry, and the 42 bus line; the adventurous can also try to reach it by subway or the Port Authority bus terminal. Public show dates are April 3-12; the show opens every day at 10 am, and closes at 10 pm except on Sundays (7 pm). The cost is $16 anyone 13 and older, $7 for children under 13; there are discounts for adult groups of 20 or more, and for child groups of 10 or more. Annual public attendance is over one million, and the display area is now 950,000 square feet including the new Javits Center North.

Read more at: http://allparnews.com/index.php/2015/03/fcas-lineup-for-new-york-show-28245

Hellcat Challenger makes its pop culture debut

Opinion. After the 2015 Dodge Charger SRT Hellcat made its music video debut in Eminem’s “Guts Over Fear” video, the two-door Mopar muscle car packing the 707 horsepower Hellcat Hemi has made its own popular culture debut.

Like the Hellcat Charger, the supercharger Challenger has scored a role in a rap video, but where the Charger made a cameo appearance, the Challenger is a main character in this new video. Best of all, joining the Hellcat Challenger in this new rap video is another 2015 Challenger that appears to be a V6 SXT model based on the lack of obvious badging.

I have to say that this isn’t my type of music and, honestly, I’ve never heard of most of the guys rapping in this video, so the Hellcat Challenger doesn’t get the same level of attention that the Charger did with the Eminem video. However, this is an official video from the new The Fast and the Furious series movie Furious 7, so not only will it get lots of attention from the hip-hop community, but it will also get plenty of attention from fans of the FATF movie series — indeed, close involvement with the series has played a part in more than 3 million people watching the “Ride Out” video. All of those people have watched the Hellcat Challenger and the 2015 Challenger SXT tearing it up in the video.

This injection of the 2015 Challenger in both V6 and Hellcat form into the rap world is a big deal, as this type of non-traditional marketing attracts much younger buyers, and while they may not be able to afford a Hellcat, the V6 Challenger shown doing many of the same stunts as the 707hp version should help the SXT model appeal to those who are looking for an affordable muscle car.

So, if you hate rap music, it is probably best to watch the first music video featuring the Hellcat Challenger and the 2015 Challenger SXT with the volume turned down, but it’s still fun to watch the various Mopars in this piece getting down and dirty for the video and for the new Furious 7 movie.

As read on: http://www.allpar.com/news/index.php/2015/03/hellcat-challenger-makes-its-pop-culture-debut